Mercury VesselView - VesselView Setup Screens

Section 3 - Screen Overview and Operation
Page 40 90-8M0070299 eng MAY 2012
Screen Display
Name
Description Screen
Joystick
Displays the vessel compass direction, drive position, and amount
of drive thrust.
NOTE: This display feature is only available with dual Zeus and
Axius applications. The page is disabled for triple and quad
applications.
1580
RPM
680
RPM
37104
Skyhook
Displays the vessel compass direction and drive thrust location.
NOTE: This display feature is only available with Zeus
applications. (Triple engine display shown.)
SH
0.1
MPH
SOG
F
F
F
45155
Maintenance
Screen Display
Name
Description Screen
Maintenance
Estimates the amount of run time the engine accumulated
since the last scheduled maintenance. Normal scheduled
maintenance for the engine is 100 hours. The maintenance
screen shows a bar graph approximating the amount of time
remaining before a scheduled maintenance is required. The
maintenance screen must be turned on for this screen to be
displayed. Your owner's manual maintenance schedule should
be followed regardless of what the gauge displays.
OK
STARBOARD ENGINE
OK
OK
Scheduled Maintenance
General Maintenance
50413
VesselView Setup Screens
Calibrate
Menu Option
Description Screen
Tank
Configures each tank by type, size, and location.
27126