Section 4 - Main Menu
90-8M0070299 eng MAY 2012 Page 73
Maintenance
Maintenance Option
Some 4‑Stroke power package models have the ability to estimate the amount of run time the engine accumulated since the
last scheduled maintenance. Normal scheduled maintenance for the engine is 100 hours. The maintenance screen will show an
icon in the shape of a wrench and a bar graph approximating the amount of time remaining before a scheduled maintenance is
required. When the maintenance screen is reset, the bar graph will change to represent the scheduled maintenance has 100
hours remaining. Your owner's manual maintenance schedule should be followed regardless of what the gauge displays.
Main
Favorites
Calibrate
Settings
Maintenance
PORT Engine
STBD Engine
47876
Alarms
System Info
Maintenance
Maintenance Screens
Engine Maintenance
Some 4‑Stroke power package models have the ability to estimate the amount of run time the engine accumulated since the
last scheduled maintenance. Normal scheduled maintenance for the engine is 100 hours. The maintenance screen shows an
icon in the shape of a wrench and a bar graph approximating the amount of time remaining before a scheduled maintenance is
required. When the maintenance screen is reset, the bar graph will change to represent the scheduled maintenance has 100
hours remaining. The maintenance screen must be turned on for this screen to be displayed. Your owner's manual
maintenance schedule should be followed regardless of what the gauge displays.
In the upper left‑hand corner of the status bar are two possible icons. A green circle with "OK" indicates the maintenance
schedule has not reached 100 hours of operation. The second icon is a wrench with the letter "S" beneath it. The wrench with
the letter "S" will populate the screens with a status bar when the power package requires scheduled maintenance.
a - Green circle with "OK"
b - Wrench with the letter "S"
OK
STARBOARD ENGINE
OK
OK
Scheduled Maintenance
General Maintenance
a
S
b
50415