Section 3 - Screen Overview and Operation
Page 34 90-8M0070299 eng MAY 2012
Outboard and Jet Drive Display Screens
Screen Category Menu Screen
2‑Stroke Gas
Outboard
4‑Stroke Gas
Outboard
Gas Jet Drive Gas Verado
Propulsion
Engine Status
X X X X
Performance and
Fuel
X X X X
Peak
Performance
X X X X
Trim
X X X
Tab
X X X X
Boost
Menu option (Verado only)
Troll Control
X X X X
Cruise Control
Option (DTS only)
Smart Tow
Option (DTS only)
Vessel
Vessel Status
X X X X
Tank Status
X X X X
Generator
X X X X
Environment and
Navigation
Depth
X X X X
Trip Log
X X X X
Fuel to Waypoint
GPS only
Navigation
GPS only
Maintenance Maintenance
Limited models
only
Products with Emissions Control
Power packages with emissions control will display a small engine icon in the upper left‑hand corner of the display when an
emissions engine control fault is detected. The icon is a representation the power package has emissions control onboard
diagnostics, also known as OBD.
Maintenance Option
Some 4‑Stroke power package models have the ability to estimate the amount of run time the engine accumulated since the
last scheduled maintenance. Normal scheduled maintenance for the engine is 100 hours. The maintenance screen shows an
icon in the shape of a wrench and a bar graph approximating the amount of time remaining before a scheduled maintenance is
required. When the maintenance screen is reset, the bar graph will change to represent the scheduled maintenance has 100
hours remaining. The maintenance screen must be turned on for this screen to be displayed. The menu path to turn this feature
on is: "Main" > "Settings" > "Screen Options" > "Maintenance."
To Next Page
Loading...
Need help?
General
