Section 7 - Environment and Navigation Menu
Page 100 90-8M0070299 eng MAY 2012
When the boat enters a waypoint arrival zone as indicated by the chart plotter, a short horn beep sounds and the "WAYPOINT
SEQUENCE" button light on the keypad starts blinking to inform the operator to make a turn. If the waypoint sequencing mode
has not been engaged, the "WAYPOINT SEQUENCING" icon light blinks at the arrival zone.
VesselView displays a pop‑up screen advising the operator to acknowledge the waypoint arrival. The operator must determine
if it is safe to turn the boat.
To Next Page
Loading...
