Section 2 - Setup and Calibration
Page 30 90-8M0070299 eng MAY 2012
4. The screen shows the configuration categories. Select either "IMPORT" or "SKIP" using the left and right arrow buttons.
a - Tank configuration
b - Trim configuration
c - Steering
d - Depth configuration
e - Units and application preferences
5. Press the down arrow button to proceed to the next configuration category. Select either "IMPORT" or "SKIP" for each of
the categories.
IMPORT CONFIG
TO IMPORT CONFIGURATION, INSERT
MEMORY STICK AND WAIT FOR INSTRUCTIONS.
MEMORY STICK READY
TO IMPORT
27309
6. Press the check button to save the selected configurations. The VesselView will restart and finish loading the configuration.
LOAD CONFIGURATION
TANK CONFIG
TRIM CONFIG
DEPTH CONFIGS
UNITS/APP PREF
STEERING
IMPORT
IMPORT
IMPORT
IMPORT
IMPORT
b
c
d
e
a
27293
To Next Page
Loading...
