Microscan QX-830 - Symbologies

5-70 QX-830 Compact Industrial Scanner User’s Manual
Symbologies
Symbologies
Note: Symbologies settings can also be sent to the scanner from ESP’s Terminal using
Microscan’s K command format. Refer to the Symbologies section of Appendix D.
To change a setting,
double-click the
setting and use the
cursor to scroll
through the options.
Click the App Mode button and then the Parameters button to display
the tree control tabs.
Then click the Symbologies tab to display the Symbologies tree control.
To open nested options,
single-click the +.
The * indicates
that the setting
is the default.