Microscan QX-830 - Read Rate

7-4 QX-830 Compact Industrial Scanner User’s Manual
Read Rate
Read Rate
Important: When Read Rate is enabled, the Configuration Database is not active,
regardless of how the scanner is configured.
Click the Utilities button and then the Read Rate tab
to display the Read Rate view.
To see the number of decodes per second,
click the Decodes/sec radio button and
then the Start button.
To see the percentage of decodes, click
the Percent radio button and then the Start
button.
To end a Read Rate test, click the Stop
button (the Start button becomes a Stop
button during an active Read Rate test.)
Read Rate information is displayed in
the lower portion of the Utilities view.
Serial commands can also be sent to
the scanner from this screen.