QX-830 Compact Industrial Scanner User’s Manual 5-177
Scanner Parameters
Diagnostics
Note: Matchcode settings can also be sent to the scanner from ESP’s Terminal using
Microscan’s K command format. Refer to the Diagnostics section of Appendix D.
To open nested options,
single-click the +.
To change a setting, double-click
the setting and use the cursor to
scroll through the options.
Click the App Mode button and then the Parameters button to display
the tree control tabs.
Then click the Diagnostics tab to display the Diagnostics tree control.
The * indicates
that the setting
is the default.
To Next Page
Loading...