Microscan QX-830 - Main Menu; Command Menu; Embedded Menus

7-28 QX-830 Compact Industrial Scanner User’s Manual
Embedded Menus
Embedded Menus
The QX-830 contains Embedded Menus to provide easy configuration in situations where
a ESP Software may not be available or applicable.
The Embedded Menus consist of a Main Menu and a sub-menu for every group of commands.
The following example shows how a user can operate the QX-830’s Embedded Menus.
Main Menu
For the purpose of this example, assume the user wants to navigate to the Symbologies
menu. The user would select C from the list.
=========================[MAIN MENU]============================
A) COMMUNICATION
B) SCANNER SETUP
C) SYMBOLOGIES
D) SCANNER I/O SETUP
E) DIAGNOSTICS SETUP
F) CONFIG IP DATABASE
G) OUTPUT ORDER FILTER
H) MATCHCODE
-- PLEASE PRESS A-H TO EDIT, ESC TO EXIT |
Command Menu
The user then selects B to navigate to the Code 128 menu.
=======================[SYMBOLOGIES]============================
---- Code Type --------------------- Status ----------
A) CODE 39 ENABLE
B) CODE 128 DISABLE
C) CODE I 2 OF 5 DISABLE
D) CODABAR DISABLE
E) UPC DISABLE
F) CODE 93 DISABLE
G) PHARMA CODE DISABLE
H) PDF417 DISABLE
------------- Global Parameters -------------
I) Quiet Zone Status = DISABLE
J) Symbology Identifier Status = DISABLE
K) Background Color = White
-- PLEASE PRESS A-K TO EDIT, 1=MAIN MENU, 2=PREVIOUS MENU, ESC TO EXIT |