Microscan QX-830 - Matchcode

5-168 QX-830 Compact Industrial Scanner User’s Manual
Matchcode
Matchcode
Note: Matchcode settings can also be sent to the scanner from ESP’s Terminal using
Microscan’s K command format. Refer to the Matchcode section of Appendix D.
To open nested options,
single-click the +.
To change a setting, double-click
the setting and use the cursor to
scroll through the options.
Click the App Mode button and then the Parameters button to display
the tree control tabs.
Then click the Matchcode tab to display the Matchcode tree control.
The * indicates
that the setting
is the default.