Microscan QX-830 - I;O Parameters

QX-830 Compact Industrial Scanner User’s Manual 5-107
Scanner Parameters
I/O Parameters
Note: I/O Parameters settings can also be sent to the scanner from ESP’s Terminal using
Microscan’s K command format. Refer to the I/O Parameters section of Appendix D.
To open nested options,
single-click the +.
To change a setting, double-click the
setting and use the cursor to scroll
through the options.
Click the App Mode button and then the Parameters button to display
the tree control tabs.
Then click the I/O tab to display the I/O Parameters tree control.
The * indicates
that the setting
is the default.