QX-830 Compact Industrial Scanner User’s Manual 5-183
Scanner Parameters
Low Temperature Threshold
A message can be defined that will display when a user-set Low Temperature Threshold
has been reached. The message repeats once every 30 minutes until the condition is
corrected. This value is a reference to the external ambient temperature in the environment
around the scanner.
Helps ensure that the scanner is being used within its temperature specification.
The user can set a low temperature value that, whenever the ambient temperature falls
below it, causes a low temperature message to be displayed. If Low Temperature
Threshold is set to zero, the warning message will be disabled.
Status
Allows the user to Enable or Disable the Low Temperature Threshold.
Message
The user can enter a message of up to 10-characters that will be displayed whenever the
ambient temperature falls below the Low Temperature Threshold.
To Next Page
Loading...