Microscan QX-830 - Page 261

QX-830 Compact Industrial Scanner User’s Manual 7-3
Utilities
<Zrdall>
Recall Microscan Default Settings and Save for
Power-On (Will also default “sticky settings”)
Default/Reset/Save <A> Reset (Will not save for power-on)
<Arp> Reset and Recall Power-On Parameters
<Arc>
Reset and Recall Customer Default Parameters
<Ard> Reset and Recall Microscan Default Parameters
Scanner Status
Request Commands
<K?> All Status Request
<K??> All Descriptor Status Request
<K?#> All Range Status Request
<Knnn?> Single Status Request
<Knnn??> Single Descriptor Status Request
<Knnn?#> Single Range Status Request
<Knnnd> Default Customer Parameter
Other Serial Utility
Commands
<@CAL> Calibrate without Menu
<@> Calibrate with Menu
<BCCFG> Enter Bar Code Configuration