QX-830 Compact Industrial Scanner User’s Manual 5-139
Scanner Parameters
Decodes per Trigger
When set to this mode, and when the appropriate output is set to output on trend analysis,
the scanner will function in a Decodes per Trigger mode during
the read cycle and the
trend analysis operation. Output will be activated
based on whether or not the symbol
decode count at the end of the read cycle crosses the decodes per trigger threshold.
Note: Although this setup causes the scanner to function in a Decodes per Trigger
mode, the decode count will only be appended to the symbol data if the status of the
Decodes per Trigger command is enabled.
To Next Page
Loading...