Microscan QX-830 - Page 326

A-38 QX-830 Compact Industrial Scanner User’s Manual
Serial Commands
Separator (Composite)
AIAG
Depth of Field Enhance
Code 39
Check Character Status (Code 39)
Check Character Output Status (Code 39)
Serial Cmd: <K453,symbology status,separator status,separator>
Default: , (comma)
Options: Any 7-bit ASCII character
Serial Cmd: <K454,status,ID1,status1,ID2,status2,ID3,status3,ID4,status4,ID5a,ID5b,
ID5c,status5,ID6,status6,ID7,status7,ID8,status8,ID9, status9,ID10, status10,
ID11,status11,ID12,status12>
Default: 0 = Disabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K456,mode>
Default: 2 = Medium
Options: 0 = Disabled
1 = Low
2 = Medium
3 = High
Serial Cmd: <K470,status,check character status,check character output status,large
intercharacter gap,fixed symbol length status,fixed symbol length,full ASCII
set>
Default: 1 = Enabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd:
< K470, status, check character status ,check character output status,large
intercharacter
gap,fixed symbol length status,fixed symbol length,full ASCII
set>
Default: 0 = Disabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd:
< K470, status,check character status, check character output status ,large
intercharacter
gap,fixed symbol length status,fixed symbol length,full ASCII
set>
Default: 0 = Disabled
Options: 0 = Disabled 1 = Enabled