Microscan QX-830 - Page 339

QX-830 Compact Industrial Scanner User’s Manual A-51
Appendices
Scan Speed
Laser Power
Laser Framing
Symbology
Serial Verification
Serial Command Echo Status
Serial Command Beep Status
Control/Hex Output
Serial Cmd: <K521,unused,video,scan speed,laser power,laser framing,symbology>
Default: 1 = Calibrate
Options: 0 = Don’t Calibrate 1 = Calibrate
Serial Cmd: <K521,unused,video,scan speed,laser power,laser framing,symbology>
Default: 1 = Calibrate
Options: 0 = Don’t Calibrate 1 = Calibrate
Serial Cmd: <K521,unused,video,scan speed,laser power,laser framing,symbology>
Default: 0 = Don’t Calibrate
Options: 0 = Don’t Calibrate 1 = Calibrate
Serial Cmd: <K521,unused,video,scan speed,laser power,laser framing,symbology>
Default: 1 = Calibrate
Options: 0 = Don’t Calibrate 1 = Calibrate
Serial Cmd: <K701,serial command echo status,serial command beep status,
control/hex output>
Default: 0 = Disabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K701,serial command echo status,serial command beep status,
control/hex output>
Default: 0 = Disabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K701,serial command echo status,serial command beep status,control/hex
output>
Default: 0 = Control
Options: 0 = Control 1 = Hex