18 QX-830 Compact Industrial Scanner User’s Manual
S
Single Beep Calibration
Single Beep Disabled
Single Beep EZ Button Mode
Single Beep Read Rate
Single Beep Save for Power-On
Single Beep Sleep Mode
Single Descriptor Status Request
Single Range Status Request
Single Status Request
Sizing Information
Skew
Skip EZ Mode
Software Defaults
Source
Standard Format
Standard Quiet Zone
Standard Ratios (Codabar)
Standard Ratios (Code 39)
Standard Ratios (Interleaved 2 of 5)
Standard, Enhanced Quiet Zone
Start and Stop Match Status (Codabar)
Start and Stop Output Status (Codabar)
Start Location
Start Trigger Character (Non-Delimited)
Statement of Agency Compliance
Statement of RoHS Compliance
Static IP Address Mode
Status Indicators
Status Indicators Disabled
Stop Bits (RS-232 A)
Stop Bits (RS-232 B)
Stop Bits (RS-422)
Stop Trigger Character (Non-Delimited)
Subnet
Substrate
Supplementals Status (UPC/EAN)
Supplementals Status Disabled
Supplementals Status Enabled
Supplementals Status Required
Supplementals Type (UPC/EAN)
Symbol Data Output
Symbol Data Output (EtherNet/IP)
Symbol Data Output (RS-232 A)
Symbol Data Output (RS-232 B)
Symbol Data Output (RS-422)
To Next Page
Loading...