MIMAKI JV3-160SP User Manual

– 5.6 –
FUNCTION
#ADJUST <ENT>
75SPII,130SPII,130SL
Thin/Standard
Thick/Standard
Thick/Highspeed
160SP
Variable-2
Normal-1
Normal-2
2
3
#ADJUST
PRN.adjust2 <ent>
#PRN.adjust2 MODE
SEL : Thin / HiSPD
Standard scan
#PRN.adjust2 MODE
SEL : Thin / HiSPD
#PRN.adjust2 LH
SEL : X DIRECTION
#PRN.adjust2 LH
SEL : Y Base
#PRN.adjust2 LH
SEL : Variable-1
4
1
Adjustment
Pattern Print
#PRN.adjust2 LH
X DIR H1-2 : 0.0
H1-2, H1-3, H1-4
Input value : -50 to 50 (1 dot unit)
Adjustment
Pattern Print
#PRN.adjust2 LH
Y Base C1-2 :0.0
C1-2, C1-3, C1-4, C1-5, C1-6, (C1-7), (C1-8)
Input value : -50 to 50 (0.1 dot unit)
2
2
3
3
Adjustment
Pattern Print
Adjustment
Pattern Print
Adjustment
Pattern Print
Adjustment
Pattern Print
Adjustment
Pattern Print
Adjustment
Pattern Print
Selected MODE is displayed upper
right.
LS : Thin / Standard
LH : Thin / Highspeed
HS : Thick / Standard
HH : Thick /Highspeed
*In 75SPII , 130SL and 130SPII,
head sensor detects "Thin/Thick"
automatically.
*It is recomended to execute head
adjustmen as head height "Thin".
#PRN.adjust2 LHV1
Adjust : Y Si.
#PRN.adjust2 LHV1
Adjust : Y Re.
#PRN.adjust2 LHV1
Adjust : Y Bi.
#PRN.adjust2 LHV1
Adjust : FINE Y Si.
#PRN.adjust2 LHV1
Adjust : FINE Y Re.
#PRN.adjust2 LHV1
Adjust : FINE Y Bi.
H1-2, H1-3, (H1-4)
Input value : -50 to 50 (1 dot unit)
H1-2, H1-3, (H1-4)
Input value : -50 to 50 (1 dot unit)
Input value : -50 to 50 (1 dot unit)
Input value : -50 to 50 (1 dot unit)
C1-2, C1-3, C1-4, C1-5, C1-6, (C1-7), (C1-8)
Input value : -50 to 50 (0.1 dot unit)
C1-2, C1-3, C1-4, C1-5, C1-6, (C1-7), (C1-8)
Input value : -50 to 50 (0.1 dot unit)
#PRN.adjust2 LHV1
Y Si H1-2 : 0.0
#PRN.adjust2 LHV1
Y Re H1-2 : 0.0
#PRN.adjust2 LHV1
Y Bi H1-1 : 0.0
#PRN.adjust2 LHV1
Y Si C1-2 : 0.0
#PRN.adjust2 LHV1
Y Re C1-2 : 0.0
#PRN.adjust2 LHV1
Y Bi C1-1 : 0.0

MIMAKI JV3-160SP Specifications

General

Brand	MIMAKI
Model	JV3-160SP
Category	Plotter
Language	English