– 3.7 –
WRONG CARTRIDGE
KKMMCCYY
NO CARTRIDGE
KKMMCCYY
• Different types of
filling ink and IC chip
information ink.
• Different types of slot
color installed into
cartridge and IC chip
information ink.
• When counted ink
quantity amounts to
twice as much as ink
capacity, the volume of
remaining ink indicates
outlier.
• Cartridge with
rewritten remaining ink
is installed.
• The ink cartridge is
not attached to the ink
station.
• Couples of errors occur
at a time.
Failure of initial
writing IC chip.
Or exchange IC chip of
different cartridge.
• 440cc cartridge cannot
be used. (Indicated
only the case of JV3-
75SPII.)
• The preheater or print
heater has failed.
1) Check the type of the loaded ink
cartridge.
1) Insert ink cartridge at correct position.
1) Replace the ink cartridge with a new
one.
2) Upgrade the most recent F/W.
1) Attach the ink cartridge(s)
corresponding with the color shown
on the display.
1) Replace the ink cartridge with a new
one.
1) Install the protection cover to use
440cc cartridge.
1) Press the [HEATER] key to display
the details of the error. Check the
error.
Message Description
Corrective measures and
recovering procedures
Kind of INK
KKMMCCYY
Color of INK
KKMMCCYY
< LOCAL >
timeLIMIT KKMMCCYY
WRONG INK IC
KKMMCCYY
Kind of INK
KKMMCCYY
WRONG CARTRIDGE
KKMMCCYY
Not Use 440 cc
KKMMCCYY
<LOCAL> ! HEATER
width: xxxxx mm
∗ REMOTE ∗ ! HEATER
TYPE. 1 0.0 0 m
To Next Page
Loading...
Need help?
General