Mindray BeneVision TM80 Service Manual

TM80 Telemetry Monitor Service Manual 3-93
increase probability
of offline when
roaming, so not be
recommended.
WLAN can't use other
security mode.
3 AP MAC
address
The broadcast MAC
address of AP is fixed
(BSSID).
AP BSSID is used to
locate the TM80
device. If it is
changed, failure to
locate the TM80 may
occur.
Check with hospital
IT if this
requirement is met
or not.
4 AP channel
width
If the AP supports
802.11n/ac, set the
channel width to
20Mhz, don’t use
HT40 or even HT80.
Check with hospital
IT if this
requirement is met
or not.
5 Dedicated
VLAN
The TM80 needs to
work on a dedicated
VLAN.
Using VLAN can
minimize Broadcast
or multicast data
which can affect
TM80 stability.
Check with hospital
IT if this
requirement is met
or not.
Requirements of AP capability

Mindray BeneVision TM80 Specifications

General

Brand	Mindray
Model	BeneVision TM80
Category	Monitor
Language	English