3-18 TM80 Telemetry Monitor Service Manual
3.2.2 Configuration Requirements for WLAN of TM80
Requirements include two types: Network service andVLAN, some important
settings of network device.
3.2.2.1 Network Service andVLAN
No. Item Requirements of the TM80 Description
1 Port UDP ports 5500 and 6678 are enabled.
TCP ports 6587 and 7779 are enabled.
The requirement
must be met.
2 VLAN
bandwidth
The planned bandwidth of TM80 must
be larger than N*100 kbps (N is the
number of installed TM80 products).
For example, if 10 TM80 products are
working at the same time, the VLAN
needs to meet the bandwidth of 1000
kbps.
The requirement
must be met.
3 Network
continuity
In the coverage area of TM80, the
network belongs to the same WLAN. All
APs use the same SSID and encryption
mode.
The requirement
must be met.
Service port
The TM80 needs UDP ports 5500 and 6678 and TCP ports 6587 and 7779 on
the network to be enabled so as to ensure that the TM80 can be discovered by
the CMS, establish network connections, and transmit monitoring data.
Bandwidth
The VLAN serving the TM80 may share wired network trunks with other VLANs.
The hospital must ensure that bandwidth utilization of trunks does not exceed
80%. If the bandwidth of a VLAN can be configured, the bandwidth configured
for the VLAN serving the TM80 is recommended to be decreased by 50%. If 10
To Next Page
Loading...
Need help?
General
