TM80 Telemetry Monitor Service Manual 3-67
3.8.4 Network Verification Process
Network Verification aims to confirm coverage, connectivity, service ports, and
network bandwidth. In addition, other configuration requirements of the TM80
need to be confirmed with the IT Dept. of the hospital. For the Verification content
and method see 3.11.3Network Acceptance Table.
This part is completed through two ways: First the hospital completes items
requiring self-check of the hospital’s IT Dept., as indicated in the Network
Verification Table. Then customer service personnel or authorized party confirms
items on site and finally completes the Network Acceptance Table. If any item is
found incompliant during network Verification test, adjustment should be made
before the TM80 is installed.
A laptop computer needs to be used to simulate the TM80 main unit, so as to test
coverage, connectivity, service ports, and network bandwidth. During the test, the
SSID broadcast needs to be enabled to ensure that the SSID can be scanned.
To Next Page
Loading...
Need help?
General
