TM80 Telemetry Monitor Service Manual 3-35
The figure below shows the specific AP configuration.
3. Click Apply and Save Configuration.
3.4 Configuration of Aruba Network Devices
This section describes how to configure Aruba WLC and APs to meet wireless
networking requirements of Mindray telemetry monitors. It consists of two parts: list
of supported network devices and specific configuration requirements.
Because the IT infrastructures of different hospitals are different, below
configuration is only for your reference. You need to modify the configuration
according to your hospital IT department.
3.4.1 Recommended Devices
WLC: Aruba 7005 series
AP: Aruba APIN0205
To Next Page
Loading...
