Mindray BeneVision TM80 - WLAN Setup

TM80 Telemetry Monitor Service Manual 3-69
Item Description Remarks
Main
Menu->Maintenance
->Service->WLAN
test->WIFI
Regulatory domain
Set the region where
the TM80 will be used
For details, refer to3.9.4.3WiFi
Regulation Domain.
NOTE
 After changing the setting in Main Menu ->Maintenance->Service,
you should reboot TM80 to make sure that TM80’s settings take effect.
3.9.1 WLAN Setup
1. Press to enter the main menu.
2. Tap Maintenance→ enter the required passcode→ tap Network→ tap
WLAN Setup.
3. Enter a network name for Network Name.
4. Set Security Type to WPA/WPA2 EAP or WPA/WPA2 PSK.
Some important information for security types:
Security Type of TM80 Compatible Security Type of AP Remarks
WPA/WPA2 PSK
WPA with AES
WPA with TKIP
WPA with AES+TKIP
WPA2 with AES
WPA2 with AES+TKIP
Do not use WPA2
with TKIP
WPA/WPA2 EAP
WPA2 with AES
WPA2 with AES+TKIP
Do not use WPA.
Do not use WPA2
with TKIP.