Mindray Resona 7T User Manual

17 Probes and Biopsy
Operator’s Manual 17 - 57
f. Release the pressing block, adjust the angle adjusting nut to confirm that the needle can
freely slide in a vertical direction.
2. Remove the needle-guided bracket:
a. Hold the probe and press the pressing block to separate V-shaped guiding block from the
pressing block.
b. Remove the needle.
c. Rotate the clamping nut to separate the bracket from the probe.

Mindray Resona 7T Specifications

General

Brand	Mindray
Model	Resona 7T
Category	Medical Equipment
Language	English