Operator’s Manual C - 1
C iScanHelper
By providing the referential information, such as, the ultrasonic image, the anatomic graphic,
scanning pictures/other scanning tips or diagnosis comments, the system helps the doctors to
operate the scanning by iScanHelper. Furthermore, it is a good platform for the self-learning and
training of ultrasound scanning technique for doctors. The system also plays a role in the assistant
software system in fulfilling training and education.
• THIS “iScanHelper” IS FOR REFERENCE OR TUTORIAL PURPOSES ONLY, AND THE
MANUFACTURER WILL NOT BE LIABLE FOR DAMAGES AND/OR OTHER
UNDESIRABLE CONSEQUENCE IN ANY KIND THAT MAY OCCUR TO THE PATIENT
OR THE USERS BY USING THE SOFTWARE.
• iScanHelper feature is available under Abdomen, gynecological, urological, obstetrical, Small
Parts and nerve block area.
C.1 Use iScanHelper for Reference
Perform the following procedure:
1. Perform ordinary scanning procedure.
2. Tap [iScanHelper] or press the user-defined <iScanHelper> key to enter iScanHelper status.
3. Select the desired section.
4. Perform scanning according to information displayed on the help information area.
Click to back to the section selection interface.
You can synchronize the help information to the main screen or read the scanning skills as
needed. see “C.3 Basic Screen and Operation” for more details.
5. Tap to exit iScanHelper.
C.2 Use iScanHelper for Learning or Training
Perform the following procedure:
1. Switch to the exam modes that support iScanHelper.
2. Tap [iScanHelper] or press the user-defined <iScanHelper> key to enter iScanHelper status.
3. Learn and practice views by system defaulted sequence according to the information displayed
on help information area; or select unfamiliar views to practice.
Click to back to the section selection interface.
You can synchronize the help information to the main screen or read the scanning skills as
needed. see “C.3 Basic Screen and Operation” for more details.
4. Tap to exit iScanHelper.
To Next Page
Loading...
Need help?
General
