12 Probes and Biopsy
Operator’s Manual 12 - 35
a. Screw the pinch nut to release the needle-guided bracket
b. Separate the bracket and the probe.
NGB-018 Metal-needle detachable needle-guided bracket
Perform the following procedure:
1. Install the needle-guided bracket:
1 Pinch nut of bracket
2 Angle pinch nut
3 Angle block
4Clamp
5Groove
6 Angle-adjusting base
7 Angle shift sign
8 Guiding block specification
9 Guiding block
10 Needle guide hole
To Next Page
Loading...