(7) Removal of the Scanner
1. Remove the Original Glass.
2. Remove the Rear Holding Bracket.
3. MovetheScannertothelocationshowninthe
illustration.
4011D037AA
4011D038AA
4. Remove one screw and unplug the connector of
the Exposure Lamp.
5. Remove the flat cable of the Exposure Lamp.
4011D039AA
6. Remove one screw and the Lamp Fixing Bracket.
7. Slide the Exposure Lamp to the front and remove
it.
Rear
4011D040AA
Front
4011D041AB
8. Remove two screws and the Scanner.
To Next Page
Loading...
