FrameMaker Ver.5.5E(PC) Di251/Di351 DIS/REASSEMBLY, ADJUSTMENT
05.03.01
D-33
3-3. ADJUSTMENT ITEMS LIST
NOTES
• Be sure to produce a Service Call Report before performing memory clear or replacing
the MFB2 Board or ROM/RAM Board.
• The figures shown in the table represent the order of adjustment steps. Where no figures
are given, the adjustments can be made at random.
Control Panel (replacement)
CCD Unit, Scanner parts
(replacement)
Original Size Detecting Sen-
sors (replacement/addition)
Scanner (removal)
Scanner Drive Cables
(replacement/installation)
PH Unit (replacement)
Variations in print leading
edge void amount
Paper skew, bend, misfeed
Shadow of Original Scales
Shadow at center of book
Memory clear
Master Board (replacement)
MFB2 Board (replacement)
ROM/RAM Board
(replacement)
Ref. Page
Check Item
Touch Panel Adj.
Automatic
adjustment
❍❍
☞ D-35
Original Size
Detecting Sensor
Adjustment
Automatic
adjustment
❍❍ ❍ ❍
☞ D-36
Loop Adjustment — ❍❍
☞ D-37
Edge
Erase
Leading
Setting range
0to5mm
(7)
☞ D-38
Trailing
Setting range
0to5mm
(8)
Right/Left
Setting range
0to5mm
(9)
Registration (CD)
(Printer)
1-sided:
10 ± 2.0 mm
2-sided:
10 ± 3.0 mm
(1)
☞ D-41
Registration (FD)
(Printer)
10 ± 2.0 mm (2)
☞ D-43
Registra-
tion (IR)
CD 10 ± 2.0 mm (5)
☞ D-45
FD 10 ± 2.0 mm (6)
Zoom
Adjust
(IR)
CD 200±2.0mm ❍ (3)
☞ D-49
FD 300±3.0mm (2) (4)
IR-Erasure Width
Setting range
0to3mm
❍
☞ D-53
Book Center Erase
Setting range
2to20mm
❍
☞ D-54
Focus-Positioning of
Scanner and 2nd/3rd
Mirrors Carriage
— ❍ (1)
☞ D-55
User's Choice Mode Re-input ❍
☞ S-6
Tech. Rep. Mode Re-input ❍
☞ S-15
Security Mode Re-input ❍
☞ S-29
Adjust Mode Re-input ❍❍
☞ D-59
IC3A Remount ❍
☞ D-58
Adjustment/
Setting Items
Job Item
To Next Page
Loading...
