FrameMaker Ver.5.5E(PC) Di251/Di351 DIS/REASSEMBLY, ADJUSTMENT
05.03.01
D-57
4. MISCELLANEOUS
4-1. INSTALLATION OF THE KEY COUNTER SOCKET (OPTION)
1. Remove the Front Cover.
2. Remove the knockout from the Front Upper
Cover.
3. Using two screws, secure the Counter Mounting
Bracket.
4011D088AB
4. Remove the harness from one cord clamp and
route it as shown in the illustration.
4011D089AA
5. Connect the Key Counter Socket connector.
6. Using two screws, secure the counter socket.
4011D090AA
7. Using two screws, secure the Key Counter Cover.
NOTE
• When the Key Counter Socket is mounted, set to
“ON” the “Key Counter” available from the Security
mode.
4011D091AA
To Next Page
Loading...
