Minolta Di251 - Page 253

Touch Panel
Display
Setting (The default is ).
Multiple-in-1 and
Booklet Copy
Zoom
Select whether to enable or disable recalling a default zoom ratio for
2in1, 4in1, or Booklet Creation.
Auto Panel Reset Select the time it takes the Auto Panel Reset function, which resets
the panel settings when the set period of time elapses after a copy
cycle has been completed or the last key operated, to be activated.
Energy Saver
Mode
Select the time it takes the copier to enter the Energy Saver mode
after a copy cycle has been completed or the last key operated.
• Press the “Clear” keyand,Usethe10-KeyPadtosetthetime.
Plug-In Counter,
ID Key Reset
Select whether or not to reset the panel automatically when the
Access Mode key is pressed (in the Copy Track mode) or the Plug-In
Counter is unplugged.
Auto Power Off Select the time it takes the Auto Shut Off function, which shuts down
the copier when the set period of time elapses after a copy cycle has
been completed or the last key operated, to be activated.
• Press the “Clear” keyand,Usethe10-KeyPadtosetthetime.
Note:
• The option of “OFF” becomes available on the screen if “Yes” is
selected for “Disable Auto Shut off” of the “Admin. Management”
function.
✽ Default: 35/25 CPM (60 min.)
LCD Back-light Off Set the time it takes the LCD backlight to turn OFF after a copy cycle
has been completed or the last key has been operated.
• Press the “Clear” keyand,Usethe10-KeyPadtosetthetime.
Highlighted
OFF
ON
30 sec. 2 min.
3 min. 5 min. No Reset
1min.
1to240min.( )
15 min.
OFF
ON
15 to 240 min. OFF
1to240min.( )
1min.