Minolta Di251 - Page 254

FrameMaker Ver5.5E(PC) Di251/Di351 SWITCHES ON PWBs/TECH. REP. SETTINGS
05.03.01
S-11
Touch Panel
Display
Setting (The default is ).
4in1 Copy Order Specify the default copying order in the 4in1 mode.
Density Priority Specify the priority exposure mode that is selected automatically
when the Power Switch is turned ON or the Panel Reset key pressed.
Default Copy
Output Levels
Auto : Select the priority exposure level in the Auto Exposure mode.
Manual: Select the priority exposure level in the Manual Exposure
mode.
Priority Density Set the image density level for printing.
Output Priority Select the priority finishing type.
Note:
• The contents of the display vary depending on the types of finishing
options mounted on the machine.
Highlighted
21
34
31
24
<Density>
<Original Image Type>
Auto Manual
Photo Text/Photo
Text
<Auto>
<Manual>
Lighter Darker
Normal
Lighter
Darker
-2 -1 1 2
0
Corner Staple 2-Hole Punch
Sort 2-Point Staple 3-Hole Punch
Group
Non Sort