Minolta Di251 - Page 256

FrameMaker Ver5.5E(PC) Di251/Di351 SWITCHES ON PWBs/TECH. REP. SETTINGS
05.03.01
S-13
(2) User Management
• Permits setting of the various User Management functions.
1. User Management Function Setting Procedure
<Procedure>
1. Press the Utility key.
2. Touch the “User Management” key.
3. Select the appropriate function.
4. After the settings are complete, touch the “Enter” key to validate the settings.
<Exiting the Mode>
• Touch the “Enter” key.
2. Settings in the User Management
Touch Panel
Display
Setting (The default is ).
Cofirmation Beep Select the volume of the "beep" that sounds when a key on the control
panel is pressed or one on the Touch Panel is touched.
Alam Volume Select the volume of the alarm.
Panel Clearing Used to disable keys on the Touch Panel, allowing the user to clean
the Touch Panel without having to turning OFF the Power Switch.
Dehumidity Starts a dehumidifying sequence for the PC Drum and Scanner.
Toner Replenisher Replenishes the supply of toner.
Data Send Transmits various data to the Center when a Data Terminal is
mounted.
Highlighted
0123 45
0123 45