(3) Admin. Management
• The entry on the “Administrator # Input ” set using the Tech. Rep. mode permits the set-
tings of the following functions.
1. Admin. Management Mode Function Setting Procedure
<Procedure>
1. Press the Utility key.
2. Touch the “Admin. Management Mode” key.
3. Enter the Administrator number from the 10-Key pad.
4. Touch the “Enter” key.
5. Select the appropriate function.
6. After the settings are complete, touch the “Enter” key to validate the settings.
<Exiting the Mode>
• Touch the “Exit” key.
2. Settings in the Admin. Management Mode
Touch Panel
Display
Setting (The default is ).
Administrator Set Displays the Max. Copy Sets and Disable Auto Shut OFF screens.
Max. Copy Sets Determine the number of copies or copy sets that can be set using the
10-Key Pad.
Disable Auto Shut
Off
Select whether to enable or disable the setting of the “Auto Shut Off”
function available from User’s Choice.
Copy Track Displays the various setting screens including Copy Track.
Copy Track Mode Select the number of accounts to be controlled
Copy Track Data Select the particular account number.
Output the copy track data.
<Procedure>
Place the required number of sheets of A4L or Letter L paper on the
1st Drawer.
✽ When “All Counter Reset” is touched, it clears all data under con-
trol.
Highlighted
1to99 OFF
No Not displayed.
Yes Displayed.
OFF 100 Accounts 1 100 Accounts 2 1000 Accounts
To Next Page
Loading...
