FrameMaker Ver5.5E(PC) Di251/Di351 SWITCHES ON PWBs/TECH. REP. SETTINGS
05.03.01
S-15
Touch Panel
Display
Setting (The default is ).
100 Accounts-1
100 Accounts-2
100 Accounts-1
• Copying is authorized only for the accounts, for which Access
Codes have been programmed.
100 Accounts-2
• Permits the accounts, for which Access Codes have been pro-
grammed, to make copies. Copy track data can also be maintained
if the Access Mode key is pressed before attempting to make cop-
ies.
The copy track data of the selected page is displayed.
“No.”: Enter the set account number from the 10-Key Pad.
“Total Count”: Displays the count of the Total Counter.
“Size Count”: Displays the count of the Size Counter.
“Copy Limit”: Enter the maximum number of copies that can be made
from the 10-Key Pad.
“Access Code”: Enter the access number, which can range from 0001
to 9999, from the 10-Key Pad.
✽ These data can be cleared with the Clear key.
1000 Accounts The copy track data of the selected page is displayed.
“No.”: Displays the account number. (Setting cannot be changed.)
“Total Count”: Displays the count of the Total Counter. (It can be
cleared with the Clear key.)
Note:
• The account number corresponds to the access code(ID) of that
particular account.
Highlighted
To Next Page
Loading...
