4-4. Setting in the Tech. Rep. Mode
(1) Tech. Rep. Mode
• This function allows the Tech. Rep. to make various settings and adjustments.
1. System Set
• Set the environment for copying operations.
Touch Panel
Display
Setting (The default is ).
Auto Paper
Configuration
Select the paper size selection scheme for automatic original size
detection.
FLS Paper Set the size for FLS.
Simplex/Duplex
Select whether or not to enable the setting of 1-Sided 1-Sided
under Original. Copy Default available from User’s Choice.
Dry Key Set Select whether to display the Dry key for “User Management” of Util-
ity.
Notes:
• Scanner, Scanner & Drum: “Dehumidify” key is displayed.
• Disable: “Dehumidify” key is not displayed.
Function Limit Select whether to limit the functions to be set on the control panel or
not.
Highlighted
The measurement is rounded to the nearest
standard inch or metric size.
Metric
The measurement is rounded to the nearest
standard metric size.
Inch/Metric
F: 330 mm
C: 203 mm
F: 330 mm
C: 216 mm
F: 330 mm
C: 220 mm
F: 330 mm
C: 210 mm
Simplex&Duplex Permits selection of all copying modes.
Permits selection of 2-sided copying modes
only.
Duplex Only
Scanner Scanner&Drum Disable
ON
Enables the functions to set the number of copies to
be made, paper source, zoom ratio, and image den-
sity.
Enables all functions (no Limit)
OFF
To Next Page
Loading...
