(3) Administrator # Input
• Set an ID number for opening the “Admin. Management Mode” screen of Utility Mode
from the 10-Key Pad.
(4) Counter
• Shows the number of copies made on each paper size or type.
<Clearing a Count>
1. Open the counter menu screen.
2. Select the counter to be cleared.
3. Press the Clear key.
4. Touch “END”.
Press the Interrupt key to undo the clearing operation, restoring the original count.
✽ "I/C Life 1" and "I/C Life 2" of "PM" cannot be cleared. They are automatically reset when
a new I/C is installed.
<Clearing All Counts of a Counter Type at Once>
1. Touch the “Counter Reset” key.
2. Select the counters to be cleared all at once.
3. Touch “OK”.
Touch Panel
Display
Setting (The default is ).
Machine
Configuration
Displays the machine configuration status.
Technical Memo Enter the serial number and other data.
Original Size
Detecting
Option
Select “ON” when the optional Original Size Detecting Sensor is
mounted.
Touch Panel
Display
Setting
Paper Counts the number of sheets of paper used according to the size and
type.
Highlighted
ON
OFF
Paper size Paper Type
A3 11 x 17 Normal
B4 11 x 14 Recycle
A4 Letter Special
B5 Legal Not for 2-sided
A5 Exec.
FLS 5-1/2 x 8-1/2
To Next Page
Loading...
