106491_C User manual AVIOR-2 MIP-2_En.docx
MIRION TECHNOLOGIES (Canberra) S.A.S, BP249, ZI de Vauzelles, 3760
3 PRECAUTIONS OF USE
Do not touch the LCD screen as well as the function keys with sharp or hard objects
Do not use strippers, waxes or corrosive solvents to clean the front of the unit, use only a soft, dry or
damp cloth.
Only equipment and accessories recommended and sold by MIRION TECHNOLOGIES (Canberra)
SAS must be connected to the AVIOR-2 or MIP-2.
: The replacement of the power cable must be done with a cable identical to that recommended
(See § 4).
: 24 VDC power supply option. Do not connect dangerous voltage to the terminals of the 24
VDC auxiliary power supply, voltage that may present a risk of electric shock or burn.
: Audio output option. To avoid possible hearing damage, do not listen at high volume for a
long time.
Use headphones and earphones limited to 100 dB (A) acoustic output.
4 DISPOSAL OF THIS EQUIMPENT
This equipment may contain substances that could have an effect on the environment and human
health.
Users / owners of this equipment are responsible for ensuring that the equipment is not a risk to the
environment or health when it is no longer used and must be disposed of.
The following symbol, which you will also find on MIRION TECHNOLOGIES (Canberra) SAS products,
indicates that these products should not be disposed in unsorted municipal waste. It must be sorted.
This equipment is subject to the Decree 2005-829 of 20/07/05 on the disposal of Waste Electrical and
Electronic Equipment (WEEE), please contact your nearest MIRION TECHNOLOGIES (Canberra)
SAS office for advice on the proper disposal of this equipment.
To Next Page
Loading...
