106491_C User manual AVIOR-2 MIP-2_En.docx
MIRION TECHNOLOGIES (Canberra) S.A.S, BP249, ZI de Vauzelles, 3760
To perform a CPC, press the key and enter the validity date of the CPC and the date of 6.
validity of the IPC.
To change the validity period:
x Increase or decrease the number with or ,
x Change column with or ,
x Save the duration with the key .
Press the key several times to return to the main menu.7.
14.13 DEFAULT PARAMETERS OF COUNTING SCALE
: The configuration of the default parameters of the « Counting scale » measurement is
accessible only at the « Administrator » user level (To change the user level, refer to § 13.15
Press the key to access the main menu1.
Note: The « Measure Mode » line is selected by default. If necessary press the or keys to
select the « Settings » line
To Next Page
Loading...
