USER MANUAL
AVIOR-2/AVIOR-2 I/O & MIP-2/MIP-2 I/O
106491_C User manual AVIOR-2 MIP-2_En.docx
MIRION TECHNOLOGIES (Canberra)S.A.S, BP249, ZI de Vauzelles, 37602
Press the or key to display the « Periodic Control » menu.3.
Note: The « Probes » line is selected by default. Press the key or to select the
« Monitor » line.
Press the or key to display the choice of control.4.
Note: The « Intermediate Control » line is selected by default. Press the or keys to
select the « Calibration control » line
Press the or key to display the « Calibration Control » menu5.
To activate the notification of the expired control and / or block the measurement:
x Select the line with or ,
x Activate the box with the key ,
x Exit with the key and / or select another line to be modified with the or keys.
To Next Page
Loading...
