Mirion Technologies AVIOR-2 - Loud Speaker Audio Output Option

USE MANUAL
AVIOR-2/AVIOR-2 I/O & MIP-2/MIP-2 I/O
18 / 118
106491_C User manual AVIOR-2 MIP-2_En.docx
MIRION TECHNOLOGIES (Canberra) S.A.S, BP249, ZI de Vauzelles, 3760
2
Loches Cedex
LED status for a 1-channel probe
Couleur Indication
Channel 1
probe
Off Missing probe
Flashing green
Connected probe being initialized or searched or
calculation of the background noise
Flashing Purple
Saturation or probe fault
or AVIOR-2 fault (or MIP-2) (4 flashing LEDs)
Fixed green Connected probe
Flashing red High threshold alarm
Flashing orange Low threshold alarm
Note : A 1-channel probe can group several transmitters.
Particularity of a 2-channels probe
Color Indication
Channel 2
probe
Flashing red High threshold alarm channel 2
Flashing orange Low threshold alarm channel 2
Flashing Purple
Saturation or probe fault
or AVIOR-2 fault (or MIP-2)
Channel 1
probe
Flashing red High threshold alarm channel 1
Flashing orange Low threshold alarm channel 1
Flashing Purple Saturation or probe fault
9.2.4 Loud speaker audio output option
The loud speaker emits several modulated sounds in frequency and fixed or adjustable level:

A simulated sound for the audible indication of the count rate of a channel (Enabled and adjustable
in volume by the operator),
Note: Sound activation is represented by the symbol at the top of the screen.
 Two mixed simulated sounds for the audible indication of the count rate of two separate channels,
when only two measurement channels on all the interfaces are displayed,

An alarm sound low threshold of fixed volume,

An alarm sound high threshold of fixed volume,

A sound of saturation, of fixed volume, of the probe.
Note: Alarm and saturation sounds are predominant on simulated sounds.
 Alert sound for messages: « Low battery », « CPC expired », « IPC expired », « Error monitor
IPC expired », « Error monitor CPC expired » and probe error messages.
With the audio output of AVIOR-2 I/O & MIP-2 I/O, the use of stereo headphones plugged into the jack,
all sounds are reported in the headset: alarm sounds and saturation, simulated sounds and alert sound.
: To avoid possible hearing damage, do not listen at high volume for a long time.
Use headphones and earphones limited to 100 dB (A) acoustic output.