USER MANUAL
AVIOR-2/AVIOR-2 I/O & MIP-2/MIP-2 I/O
106491_C User manual AVIOR-2 MIP-2_En.docx
MIRION TECHNOLOGIES (Canberra)S.A.S, BP249, ZI de Vauzelles, 37602
Press the key or to display the « Measure Mode » and press the key to select 2.
the line « Measure Type: …. ».
The end-of-line character string indicates « Net » for a measure with deduced BGK or « Gross »
for a measure without deduced BGK.
Press or to display « Net » or « Gross ».
11.7.1 Acquisition of background noise in « Net » mode
When the « Measure Type: Net » is selected. An acquisition of background noise is then necessary.
Two types of acquisition can be performed:
- Dynamic acquisition when the probes are equipped with presence sensors. The presence sensor
determines if there is a potentially contaminated item to be measured. Otherwise the unit will able
to background noise during the minimum integration time setting (see § 13.1).
The device is then ready to perform a « NET » type measurement and waits for a presence:
To Next Page
Loading...
