Mirion Technologies AVIOR-2 - Periodical Control of Calibration (Cpc) of Avior-2 or Mip-2

USE MANUAL
AVIOR-2/AVIOR-2 I/O & MIP-2/MIP-2 I/O
80 / 118
106491_C User manual AVIOR-2 MIP-2_En.docx
MIRION TECHNOLOGIES (Canberra) S.A.S, BP249, ZI de Vauzelles, 3760
2
Loches Cedex
14.12 PERIODICAL CONTROL OF CALIBRATION (CPC) OF AVIOR-2 OR MIP-2
The configuration of the CPC is only accessible at the « Administrator » user level (To change the
user level, refer to § 13.15).
Press the key to access the main menu1.
Note: The « Measure Mode » line is selected by default. If necessary press the or keys to
select the « Settings » line
Press the or key to view the « Settings » screen.2.
Note: The line « Background noise » is selected by default. Press the or keys to
select the « Periodic Control » line.