Mirion Technologies AVIOR-2 - Configuration of the Cpc Alert Exceeded of the Csp Type Probes

USE MANUAL
AVIOR-2/AVIOR-2 I/O & MIP-2/MIP-2 I/O
76 / 118
106491_C User manual AVIOR-2 MIP-2_En.docx
MIRION TECHNOLOGIES (Canberra) S.A.S, BP249, ZI de Vauzelles, 3760
2
Loches Cedex
14.10 CONFIGURATION OF THE CPC ALERT EXCEEDED OF THE CSP TYPE PROBES
: The configuration only applies for CSP type probes.
The configuration of the CPC alert exceeded is only accessible at the « Administrator » user level (To
change the user level, refer to § 13.15).
Press the key to access the main menu1.
Note: The « Measure Mode » line is selected by default. If necessary press the or keys to
select the « Settings » line
Press the or key to view the « Setttings » screen.2.
Note: The line « Background noise » is selected by default. Press the or keys to
select the « Periodic Control » line.
Press the or key to display the « Periodic Check » menu.3.
Note: The « Probes » line is selected by default