USER MANUAL
AVIOR-2/AVIOR-2 I/O & MIP-2/MIP-2 I/O
106491_C User manual AVIOR-2 MIP-2_En.docx
MIRION TECHNOLOGIES (Canberra)S.A.S, BP249, ZI de Vauzelles, 37602
Press the or key to start the measurement.3.
In case of contamination (Low alarm threshold exceeded), the AVIOR-2 / MIP-2 will sound an audible
alarm, the LEDs will change to flashing amber.
Note: For 2-channel probes, only the LED of the channel concerned changes to the flashing amber
state.
Press a key on the keyboard to temporarily inhibit the sound. The sound is reactivated automatically at
exit of the measuring mode.
In case of high contamination (exceeding of the upper alarm threshold), AVIOR-2 / MIP-2 activates an
audible alarm, the lights are flashing red.
Note: For 2-channel probes, only the LED of the channel concerned changes to the flashing red
state.
Press a key on the keyboard to temporarily inhibit the sound. The sound is reactivated automatically at
exit of the measuring mode.
To Next Page
Loading...
