USER MANUAL
AVIOR-2/AVIOR-2 I/O & MIP-2/MIP-2 I/O
106491_C User manual AVIOR-2 MIP-2_En.docx
MIRION TECHNOLOGIES (Canberra)S.A.S, BP249, ZI de Vauzelles, 37602
ܹ
ଵ
= ܻ
ଵ
ଶ
െ4. ܣܮܵ
ଶ
. ܭ
ଶ
ோ
್ೖ
்
್ೖ
ALS is the threshold of alert in c/s
ܭ
is the coefficient of false alarm
ܭ
is the coefficient of no detection
ܴ
is the average value of the BKG
ܶ
is the time of acquisition of the BKG
If the calculated measurement time is less than the minimum integration time (see §13.1) then the
minimum time is used.
If the calculated measurement time is greater than the maximum integration time (see § 13.1):
-Generation of the alert message on excessive BKG is generated if the function is activated
(See §
13.1)
-Use of the maximum time if the function is not activated (See § 13.1)
If the option « Hand Front & Back » has been selected (see § 13.2), the user must turn his 7.
hand on the probe to make the second measurement.
At the end of the measurement, the result is displayed according to the probe type and the 8.
options chosen:
ou
To Next Page
Loading...
