Mirion Technologies AVIOR-2 - Page 57

USER MANUAL
AVIOR-2/AVIOR-2 I/O & MIP-2/MIP-2 I/O
106491_C User manual AVIOR-2 MIP-2_En.docx
MIRION TECHNOLOGIES (Canberra)S.A.S, BP249, ZI de Vauzelles, 37602
Loches Cedex
55 / 118
In the case of 2 connected probes, press the key or to select the « Interface 1 » or 1.
« Interface 2 » line.
Note: For MIP-2, only interface 2 is compatible.
Press the key or to display the « Probe Configuration » screen and press the key 2.
to select the « Intermediate Control » line.
To view the IPC information, press the key or and press the key to return to the 3.
previous menu.
To perform a IPC, press the key or and select the measurement channel (Į or ȕ).4.