USER MANUAL
AVIOR-2/AVIOR-2 I/O & MIP-2/MIP-2 I/O
106491_C User manual AVIOR-2 MIP-2_En.docx
MIRION TECHNOLOGIES (Canberra)S.A.S, BP249, ZI de Vauzelles, 37602
Press the or key to display the « Probe Configuration » screen and press the key2.
to select the « Calibration control » line.
Press the or key to view the CPC.3.
: If the validity date of the CSP probe is reached, the probe can only be calibrated with
Canberra Smart Probe Software (CSPS).
Note: For Nardeux type probes, only the generic
coefficient of the type of probe connected
and the unit are indicated (See § 12.2).
Press the key to return to the « Probe Setup » screen.4.
To Next Page
Loading...
