96
C
ONFIGURING SOFTKEYS RECEIVED CALLERS LIST KEY
Softkeys
2. Select from Key 1 through Key 20 on the Top keys.
or
Select from Key 1 through Key 18 on the Bottom keys.
3. In the Type field, select Directory.
4. In the Label field, enter a label to apply to this key.
5. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
6. Select from Key 1 through Key 84(M695).
7. In the Type field, select Directory.
8. Click Save Settings.
Received Callers List Key
NOTE: Received Callers List information in this User Guide describes the phone’s native Received Callers
List. In some environments, the Received Callers List key may bring up a Received Callers List provided
by the call manager; therefore, depending on your call manager, the Received Callers List on your phone
may function and behave differently then what is documented in this User Guide. If this is the case,
contact your System Administrator for more information regarding your specific Received Callers List.
By default, the 6920 has a dedicated Received Callers List key. However, using the Mitel Web UI, you
can assign the Received Callers List key to any key on the left or bottom keys on the phone.
To Next Page
Loading...
