39
C
USTOMIZING YOUR PHONE TIME AND DATE
Specifying the Input Language Using the Mitel Web UI
1. Click on Basic Settings > Preferences > Language Settings .
2. Select a language from the Input Languagefield. Setting this field allows you to specify the language
to use when entering text and characters in the Mitel Web UI and IP phone UI. Valid values are:
– English (default)
– Français (French)
– Español (Spanish)
– Deutsch (German)
– Italiano (Italian)
– Português (Portuguese)
– Русский (Russian)
– Nordic
– ελληνικά (Greek)
NOTE: All languages may not be available for selection. The available input languages are
dependent on the configuration enabled by your System Administrator.
3. Click Save Settings.The change is dynamic. The phone and the Mitel Web UI allow you to enter text
and characters in the language you selected.
Time and Date
On the IP phones, the following time and date sub-options are available to be configured:
• Settings:
– Time Format
– Daylight Savings
– Date Format
• Time Zone
• Set Date and Time:
– Use Network Time (configure time servers)
– Enter Time and Date
NOTE: All time and date settings can be configured using the IP phone UI. Time/Date Formats and Time
Servers are the only two time and date settings that can be configured using the Mitel Web UI.
To Next Page
Loading...
